BMW F800GS – Platinum Level Combo

$1,009.99

Lower Crash Bars / Engine guard: Whether you go off-road frequently or simply just ride highways, this product will keep your expensive engine components and radiator guard safe. It will be your most affordable and best investment.

Upper Crash Bars: Attached to the lower engine guards, it will be a killer combo and the ultimate protection to guard thousands of dollars worth of BMW parts.

Skid Plate: There’s not a single part on this product that was not exposed to the most extremes during numerous off-road rallies. On top of all, this skid plate protected our rider’s (Kinga Tanajewska) BMW GS engine in a head-on collision vs. a car! What more can we say? Nothing… Watch the video yourself: click here

Rear Rack: Adventure/Dual-sport bikes cannot be complete without decent luggage solutions. The Outback Motortek rear luggage rack was designed with full functionality in mind: large and multiple holes across the platform for all kind of tie downs, bungee cords etc. We topped it off with RotoPax mounting points, so you won’t have to drill it to fit your favorite gas can!

Note: For the 2024+ BMW F800GS, please visit our F850GS range of products here.

We do not recommend mounting top cases on our rear racks. Maximum total weight is 8kg/18lbs. Pay attention to the load distribution and frequently inspect the rack, its mounting system and hardware.

Ships from Ontario, Canada by Dualsport Plus

Delivery via Canada Post

canada-flag

BMW F650GS / F700GS / F800GS: Compatibility check

Multiple F650GS/F700GS/F800GS Names: Check here

Description

Purchase this Platinum Level Combo to outfit your BMW F800GS with the basic adventure bike necessities.

Skid Plate

  • Protects crucial areas of the engine – oil pan, engine case, oil cooler, oil filter and exhaust header! That’s a long list of very expensive parts to expose to any sort of damage that will reduce your bikes value in no time.
  • Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
  • True off-road and adventure shape – What does that even mean?? It means we have experience in building top-notch bash plates. We avoid designing skid plates that are shaped like boxes, have sharp edges and corners and will guaranteed to restrict your rides off road. Ours are more, per se, aerodynamic and will glide over and gently bounce off any object on your favourite trails.
  • 4mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
  • Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from riding through (off-road) hell, rather than your bikes chassis or engine that are worth thousands of dollars.
  • Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:

Skid plate: F650GS* / F700GS* / F800GS and 800GSA all years (parallel twin, F650GS and F700GS models must have OEM rubber isolator in order to mount our skid plate).

Lower Crash Bars / Engine Guards

  • Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
  • Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!
  • Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The F700/800GS models have very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out that results in an overly flexible and “soft” structure. It will do more damage to your GS! Our compact and tough crash bars are the only way to go here to truly protect your BMW’s expensive and fragile parts.
  • Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that’s worth thousands of dollars.
  • Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
  • 4kg / 9lbs

Compatibility:

Lower Crash Bars: F650GS / F700GS / F800GS all years (parallel twin) – Does NOT fit 800GSA.

Upper Crash bars

  • Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
  • Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!
  • Easy mounting – Mounting the upper crash bars to the bottom ones are as easy as it gets. Really.
  • Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
  • 4kg / 9lbs

Compatibility:

Upper Crash Bars: Only F800GS 2008-2018 – Does NOT fit 800GSA (nor the F700).

Rear Luggage Rack

  • Made of 5mm thick aluminum – We don’t fool around with flimsy, thin luggage racks. Outback Motortek rear luggage racks are the real deal when it comes to packing alongside Green Chile Adventure Gear tie down straps!
  • Design – Multiple and nicely spread out mounting/attaching holes. We focus on functionality before design, thus our rear luggage racks are generously sized to securely keep you luggage at its place. Guaranteed to work the best of all out there!
  • Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:

Rear luggage rack: F650GS / F700GS / F800GS and 800GSA all years (parallel twin).

Additional information
Weight 13 kg
Dimensions 71 × 51 × 31 cm
Brand

Outback Motortek

Colour

Black

Condition

New

Material

Aluminum

,

Mild Steel

Year

2008 – 2018

Products in Combo

Lower Crash Bars

,

Rear Luggage Rack

,

Skid Plate

,

Upper Crash Bars

Video Installations

BMW 650/700/800GS Skid Plate Installation

BMW 650/700/800GS Rear Luggage Rack Installation

Reviews

There are no reviews yet

Be the first to review “BMW F800GS – Platinum Level Combo”

Your email address will not be published. Required fields are marked *